Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
92
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Vertical streaks appear on the scanned image.
Do the streaks always appear in the same location?
Yes
Clean the glass sections and rollers inside the ADF.
For details, refer to "Chapter 5 Daily Care" (page 62).
No
Does the vertical streak disappear when you set a lower
resolution?
Yes
Specify a lower resolution.
No
Is there any foreign matter (such as dust or paper dust) on
the document?
Yes
Remove any foreign matter off the document.
Foreign matter may get on the glass sections inside the ADF, and may cause
vertical streaks to appear on the scanned image.
No
If the problem persists, check the items in "7.4 Before You Contact the Scanner
Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
To Next Page
Loading...
