The stacker will also be closed automatically.
Be careful not to get your fingers caught when closing the ADF.
ATTENTION
● Confirm that the ADF is closed properly. Otherwise, documents may not be fed into the ADF.
● Occasionally when scanning is complete or canceled, documents may remain in the ADF without any
error message displayed. In that case, follow steps 1 through 3 above to remove the documents.
● To continue scanning, check which page you want to resume from, and insert the document into the
return path opening or load the document in the ADF paper chute (feeder) again.
Troubleshooting
104
To Next Page
Loading...
