Fujitsu FI-800R User Manual

Setting Items
The Software Operation Panel allows the configuration of the settings that are related to scanning documents
or managing consumable parts for the scanner that is connected to the computer.
The following lists are used for configuration.
● [Device Setting]
You can configure settings that are related to counting the number of sheets scanned and managing
consumable parts. You can also configure settings that are related to managing the power of a scanner and
adjusting the position to start the scan.
● [Device Setting 2]
You can configure settings that are related to scanning documents.
Device Setting
1 Start up the Software Operation Panel.
For details, refer to Starting Up the Software Operation Panel (page 144).
2 From the list on the left, select [Device Setting] and click the [Offset] button.
Scanner Settings (Software Operation Panel)
158

Fujitsu FI-800R Specifications

General

Scanner Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	20 sheets
Daily Duty Cycle	4, 500 sheets
Supported Operating Systems	Windows, macOS
Color Depth	24-bit
Document Feeder Capacity	20 sheets
Document Size	A4, A5, A6, B5, B6, Legal, Letter
Scan Speed (A4, 200 dpi)	40 ppm / 80 ipm
Maximum Document Size	216 mm x 356 mm
Scanning Speed	Simplex: 40 ppm (color, 200/300 dpi) Duplex: 80 ipm (color, 200/300 dpi)