Fujitsu FI-800R User Manual

Various Ways to Scan
This section explains how to configure the scanner settings and scan different types of documents with the image
scanning application.
For information on other ways to scan which are not explained here, refer to the manual or help for the image
scanning application, and the help for the scanner driver.
Scanning Documents with Different Widths
ATTENTION
When you scan a mixed batch with different widths, some of the narrower documents may be skewed or not fed
into the ADF.
In that case, separate the documents by their widths, and scan them in different batches.
With the ADF paper chute (feeder), you can scan documents of different widths at the same time.
HINT
For details about document requirements for scanning a mixed batch of documents, refer to Conditions for Mixed
Batch Scanning (page 56).
1 Align the top of the documents.
66

Fujitsu FI-800R Specifications

General

Scanner Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	20 sheets
Daily Duty Cycle	4, 500 sheets
Supported Operating Systems	Windows, macOS
Color Depth	24-bit
Document Feeder Capacity	20 sheets
Document Size	A4, A5, A6, B5, B6, Legal, Letter
Scan Speed (A4, 200 dpi)	40 ppm / 80 ipm
Maximum Document Size	216 mm x 356 mm
Scanning Speed	Simplex: 40 ppm (color, 200/300 dpi) Duplex: 80 ipm (color, 200/300 dpi)