Specifying the USB Operation [USB]
Change the USB setting if a connection between the scanner and a computer cannot be established.
After the setting is changed, the scanner is restarted.
1 Start up the Software Operation Panel.
For details, refer to Starting Up the Software Operation Panel (page 144).
2 From the list on the left, select [Device Setting 2] → [USB].
3 Specify how the USB function operates.
Automatic
Operates in accordance with the connection environment. This is the factory default setting.
USB 2.0
Operates with USB 2.0.
Scanner Settings (Software Operation Panel)
181
To Next Page
Loading...
