Fujitsu FI-800R User Manual

How to Load Documents
This section explains how to load documents on the scanner.
Loading Documents
This section describes what you should do before loading standard paper documents and describes how to load the
documents.
Preparation (When Loading Multiple Documents)
When you load multiple documents in the ADF paper chute (feeder), make the following preparations.
HINT
For details about the paper size and quality required for normal operations, refer to Documents for Scanning
(page 48).
1 Check the documents.
a Check whether the documents to be loaded are of the same width or not.
Ways to load documents differ depending on whether the documents are of the same width or not.
If the documents are of different width, refer to Conditions for Mixed Batch Scanning (page 56) or
Scanning Documents with Different Widths (page 66).
b Check the number of sheets.
Up to 20 sheets can be loaded (with paper weight of 80 g/m
2
[20 lb] and thickness of the document
stack under 2 mm).
For details, refer to Loading Capacity (page 52).
2 Fan the documents.
a Grab a stack of documents, which should be 2 mm or less.
42

Fujitsu FI-800R Specifications

General

Scanner Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	20 sheets
Daily Duty Cycle	4, 500 sheets
Supported Operating Systems	Windows, macOS
Color Depth	24-bit
Document Feeder Capacity	20 sheets
Document Size	A4, A5, A6, B5, B6, Legal, Letter
Scan Speed (A4, 200 dpi)	40 ppm / 80 ipm
Maximum Document Size	216 mm x 356 mm
Scanning Speed	Simplex: 40 ppm (color, 200/300 dpi) Duplex: 80 ipm (color, 200/300 dpi)