Scanning Long Page Documents
With the ADF paper chute (feeder), you can scan documents with a length of up to 5,588 mm (220 in.).
Depending on the resolution setting or the image scanning application, the document sizes that can be scanned
may differ.
For details, refer to the help for the scanner driver and the image scanning application.
1 Open the ADF paper chute (feeder) and pull out the chute extension.
For details, refer to Setting Up the ADF Paper Chute (Feeder) (page 31).
2 Load a document in the ADF paper chute (feeder).
For details, refer to How to Load Documents (page 44).
ATTENTION
Long page documents should be loaded one sheet at a time in the ADF paper chute (feeder).
3 In the scanner driver, configure the scan settings to scan the paper size of the long page.
For details, refer to the help for the scanner driver.
4 Scan documents with the image scanning application.
For details, refer to the help for the image scanning application.
ATTENTION
When scanning a long page document, support the document with your hand so that it does not fall off or is not
fed again.
For details, refer to How to Load Documents (page 44).
Various Ways to Scan
79
To Next Page
Loading...
