LSI Error
If an LSI error occurs, the LED indicator lights up as follows.
Flashes (orange) 6 times LSI error (Front)
Turn the scanner off then back on.
If the problem persists, refer to The First Measures to Take When You Encounter any Errors or Troubles (page
140) and take measures accordingly. If the problem still persists, write down the status of the LED indicator and
contact the distributor/dealer where you purchased this product. Refer to the contact information in the Contact
List if supplied with this product, or refer to the contact information in the Contact for Inquiries section if
provided in Safety Precautions supplied with this product, and then make an inquiry.
RAM Error
If a RAM error occurs, the LED indicator lights up as follows.
Flashes (orange) 6 times RAM error
Turn the scanner off then back on.
If the problem persists, refer to The First Measures to Take When You Encounter any Errors or Troubles (page
140) and take measures accordingly. If the problem still persists, write down the status of the LED indicator and
contact the distributor/dealer where you purchased this product. Refer to the contact information in the Contact
List if supplied with this product, or refer to the contact information in the Contact for Inquiries section if
provided in Safety Precautions supplied with this product, and then make an inquiry.
Operator Panel Error
If an operator panel error occurs, the LED indicator lights up as follows.
Flashes (orange) 7 times Operator Panel error
Turn the scanner off then back on.
If the problem persists, refer to The First Measures to Take When You Encounter any Errors or Troubles (page
140) and take measures accordingly. If the problem still persists, write down the status of the LED indicator and
contact the distributor/dealer where you purchased this product. Refer to the contact information in the Contact
List if supplied with this product, or refer to the contact information in the Contact for Inquiries section if
provided in Safety Precautions supplied with this product, and then make an inquiry.
Scanner Internal Error
If a scanner internal error occurs, the LED indicator lights up as follows.
Flashes (orange) 8 times Scanner internal error
Turn the scanner off then back on.
If the problem persists, refer to The First Measures to Take When You Encounter any Errors or Troubles (page
140) and take measures accordingly. If the problem still persists, write down the status of the LED indicator and
contact the distributor/dealer where you purchased this product. Refer to the contact information in the Contact
Troubleshooting
110
To Next Page
Loading...
