The Scanner Cannot Be Powered ON
Check the following points
● Is the power cable connected properly? (page 115)
● Did you press the [Power] button on the scanner? (page 115)
If the problem persists, refer to The First Measures to Take When You Encounter any Errors or Troubles
(page 140) and take measures accordingly. If the problem still persists, check each item in Before You
Contact the Scanner Service Provider (page 141) first, then contact the distributor/dealer where you
purchased this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions
supplied with this product, and then make an inquiry.
● Is the power cable connected properly?
Solution
Connect the power cable properly.
For details, refer to Getting Started.
● Did you press the [Power] button on the scanner?
Solution
Press the [Power] button on the scanner.
For details, refer to How to Turn the Power ON (page 29).
Troubleshooting
115
To Next Page
Loading...
