Fujitsu FI-800R - Specifying the Area to Detect Overlapped Documents; Detection]

Specifying the Area to Detect Overlapped Documents [Document check area
specification for Multifeed Detection]
For documents that are loaded in the ADF paper chute (feeder), specify an area to detect overlapped documents.
Specify this item when [Check Overlapping(Ultrasonic)] or [Check Overlapping and Length] is selected for
[Multifeed].
1 Start up the Software Operation Panel.
For details, refer to Starting Up the Software Operation Panel (page 144).
2 From the list on the left, select [Device Setting 2] → [Document check area specification for Multifeed
Detection].
Select the [Selected range] check box in the window.
3 Specify the detection range.
Scanner Settings (Software Operation Panel)
185