Fujitsu FI-800R - Page 131

● Are the pad unit and pick roller clean?
Solution
Clean the pad unit and pick roller.
For details, refer to Cleaning the Inside of the Scanner (ADF) with a Cloth (page 89).
● Are the pad unit and pick roller worn out?
Solution
Start up the Software Operation Panel to check the counters for the pad unit and pick roller, and if
necessary, replace the pad unit and pick roller.
For details, refer to Checking the Sheet Counters (page 162).
For details about replacing the pad unit and pick roller, refer to Replacing the Pad Unit (page 96) and
Replacing the Pick Roller (page 99).
Troubleshooting
131