● Realizes a scanning speed of 40 ppm/80 ipm (*1)
Up to 20 sheets of documents (*2) can be loaded and scanned continuously in the ADF paper chute (feeder).
● Improved efficiency for pre-scan work
The scanner can perform "mixed batch scanning" which allows you to scan documents with different paper
weights and sizes at once.
This simplifies the process of sorting the documents before scanning.
● Reduced work loss caused by multifeeds
The scanner has ultrasonic multifeed sensors that accurately detect "multifeed" errors where two or more sheets
are fed through the scanner at once.
This detection for overlapped documents is reliable even when scanning a mixed batch of documents with
different paper weights and sizes, avoiding potential work loss.
● Intelligent multifeed detection function
When there is paper of the same size attached to a designated location on the page, the intelligent multifeed
detection function enables the scanner to recognize the location of the attachment.
The scanner does not detect the recognized area where the attachment is on as overlapping of documents so
that scanning can continue.
● Centralized management of multiple scanners
With Scanner Central Admin Server, multiple scanners can be managed together.
For example, the application can be used to update the setting information and the firmware update module
for all scanners at once, and check the operating status of each scanner.
For details, refer to the Scanner Central Admin User's Guide.
*1:When A4 size documents are scanned at 200/300 dpi using JPEG compression.
*2:When the paper weight is 80 g/m
2
(20 lb).
Scanner Overview
16
To Next Page
Loading...
Need help?
General
