HINT
When the smallest document covers the pick roller and the document loading detector even when it is
loaded towards one side as shown in the image below, load all documents so that they are aligned on
the same side. So that it prevents documents from skewing when being fed.
Paper Size
When a mixed batch with different sizes is scanned, not feeding the documents straight may cause
troubles such as paper jams or part of the image to appear missing.
It is recommended that you check the scanned images if the documents were fed skewed.
ATTENTION
● When a mixed batch with different sizes is scanned, documents are more likely to skew because the
side guides do not contact every sheet.
● Do not specify the detection method by document length when scanning a mixed batch of documents
with different lengths and detecting overlapped documents.
How to Load Documents
57
To Next Page
Loading...
