Precautions
Take note of the following:
● When using the Carrier Sheet
- Insert one Carrier Sheet into the return path opening at a time.
- Depending on the image scanning application, there may be insufficient memory to perform a
[Double-page spread] scan using the Carrier Sheet in high resolution.
In that case, specify a lower resolution and try scanning again.
- Do not write on, color, stain, or cut the end with a black and white pattern on the Carrier Sheet.
Otherwise, the Carrier Sheet may not be recognized correctly.
- Do not load the Carrier Sheet upside down.
Otherwise, a paper jam may occur and damage the Carrier Sheet and the document inside.
- Do not fold or pull the Carrier Sheet.
- Do not use a damaged Carrier Sheet.
Doing so may damage or cause the scanner to malfunction.
- Do not slide your finger on the edge of the Carrier Sheet.
Doing so may cut your finger.
- Paper jams may occur when several small documents (such as photos or postcards) are placed in the
Carrier Sheet for scanning.
It is recommended to place only one document at a time in the Carrier Sheet.
● When storing the Carrier Sheet
- Do not leave a document inside the Carrier Sheet for a long time.
Otherwise, the ink on the document may be transferred onto the Carrier Sheet.
- Do not leave the Carrier Sheet in high temperature places such as under direct sunlight or near a
heating apparatus for a long time.
Also, do not use the Carrier Sheet in such environments.
Otherwise, the Carrier Sheet may deform.
- To avoid deformation, keep the Carrier Sheet on a flat surface without any weight on it.
How to Load Documents
61
To Next Page
Loading...
