Begin as follows:
a
Ms s s
Configuration MSN MSN-1
Program MSN-1 }
transfer
Volume
MSN Name
Sound
MSN ext.
Entering or viewing an extension number (MSN)
You can only enter the MSN extension numbers with the Professional Configurator supplied on the
WIN-ToolsCD-ROM.However,youcanhavetheprogrammednumberdisplayedatthephone.Theexten
-
ded configurationallowsyoutoenterthe MSN extension number after havingentered a code number (see
page 78).
s
O
In the »Program MSN-1« menu, press
the »MSN ext. « softkey.
The programmed number is displayed.
Press OK to leave this menu.
Program dial number
MSN-1>222
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
You can only make further settings (e. g. call signaling melody, volume, name) if the number
has already been previously configured.
Setting the melody and the volume
YoucandefineandsetaspecificmelodyanditsvolumeforeachMSNorextensionnumberthatyouenter.If
you are using the telephone at an internal ISDN connection of certain elmeg PABX systems, you can pro
-
gram special ringing melodies and a different volume for internal calls.
Intheinitial setting of thetelephone,10 differentmelodiesare stored forcall signaling.These10 melodies
cannot bechanged.You canimporta further10melodies intoyourphone viaaPC. Usingthe SoundMan
-
agersuppliedwiththeWIN-ToolsCD-ROM,youcanproduceyourowntunesonthePCandthenloadthese
intothetelephone.Thesemelodiesarethenstoredinyour phoneasMelody11…20. Ready-to-usemelody
profiles for downloading to your phone are located in the WIN-Tools installation directory.
If you assign a call signaling melody to a number (MSN) that is not stored in your phone, the
first permanently stored melody in your phone is then used.
Programming a melody (sound)
In the »Program MSN-1« menu press the »Sound« softkey and then the »internal«or»ex
-
ternal« softkey. In this example: »internal«.
Configuration
80
To Next Page
Loading...
Need help?
General
