Electrical Specifications
DC Supply Voltage: 12-60 VDC
Max Current (per axis) 3.0 Amps (Selectable with AG command)
Max Step Frequency: 6 MHz
Motor Type: Bipolar 2 Phase
Switching Frequency: 60 kHz
Minimum Load Inductance: 0.5 mH
Mating Connectors
On Board Connector Terminal Pins
POWER 6-pin MATE-N-LOK
MOLEX# 39-01-2065 MOLEX#44476-3112
A,B,C,D: 4-pin Motor
Power Connectors
4-pin MATE-N-LOK
MOLEX# 39-01-2045 MOLEX#44476-3112
For mating connectors see http://www.molex.com/
Power Connector
Pin Number Connection
1,2,3 DC Power Supply Ground
4,5,6 +VS (DC Power)
Motor Connector
1 B-
2 A-
3 B+
4 A+
DMC-40x0 User Manual A4 – SDM-44140 (-D4140) • 250
To Next Page
Loading...
