Galil DMC-4040 - DMC-4040 and DMC-4080 (Step 3)

DMC-4040 and DMC-4080 (Step 3)
Step 3: Configure Circuit
Reference the instructions below for the desired configuration, and then proceed to Step 4.
 +5V High Amp Enable Sinking Configuration (Default) pg 215
 +5V Low Amp Enable Sinking Configuration pg 215
 +5V High Amp Enable Sourcing Configuration pg 216
 +5V Low Amp Enable Sourcing Configuration pg 216
 +12V High Amp Enable Sinking Configuration pg 217
 +12V Low Amp Enable Sinking Configuration pg 217
 +12V High Amp Enable Sourcing Configuration pg 218
 +12V Low Amp Enable Sourcing Configuration pg 218
 Isolated Power High Amp Enable Sinking Configuration pg 219
 Isolated Power Low Amp Enable Sinking Configuration pg 219
 Isolated Power High Amp Enable Sourcing Configuration pg 220
 Isolated Power Low Amp Enable Sourcing Configuration pg 220
DMC-40x0 User Manual Appendices • 214