Gaspardo Primo E2 - Page 72

DigiDevice
22
• Residual meters counter: distance that can be traveled spreading the quantity of fertilizer
in the hopper, with actual working settings.
SECTION 3 (WORKED)
• Weight of the product spread since the beginning of execution
• Worked hectares counter: fertilized earth surface since work beginning;
• Worked meters counter: traveled distance since work beginning.
COMMANDS
• The side keys allow passing through sections.
6. ADJUSTMENTS
VISUALIZATIONS
• Spreading width.
Refer to the paragraph regarding the Job in the Main Menu for further details about such data in job
configuration.
• Nominal value of the quantity per hectare of product to be spread.
Refer to the paragraph regarding the Job in the Main Menu for further details about such data in job
configuration.
• Icons near to the keys for increase, decrease or recover the shutters nominal position:
,
and .
When the quantity per hectare to be spread is increased or decreased, besides the
percentage indication in the section HOPPER STATUS (previous point 4), the icon referring
to increase or decrease is displayed on dark background (
or ).
COMMANDS
• Side keys near to the icons
and command increase or decrease of the quantity of
product per hectare to spread, compared to the nominal value set in the job.
• The side key near to the icon
drives the shutters to go back to nominal position, as set
in the job.
7. STOP
VISUALIZATIONS
• The STOP icon (
) appears once the machine starts spreading (see following point 8).
COMMANDS
• The side key near to the icon stops spreading, so the work session stops, shutters close
and statistics data and evaluations referring to the job are updated.
8. START / PAUSE
VISUALIZATIONS
• The START icon (
) is displayed until the spreading command has not been given yet
• The PAUSE icon ( ) appears once spreading starts, instead of the START icon.
COMMANDS