GE AT600 - Page 131

AT600 User’s Manual 119
Chapter 5. Communication
Command 196 (0xC4): Read Transducer Information
This command is to read transducer information.
Table 105: Request Data Bytes for Read Transducer Information
Byte Format Description
None
Table 106: Response Data Bytes for Read Transducer Information
Byte Format Description
0 - 3 Unsigned-32 Transducer type:
0: Other;
10: CPT-0.5
11: CPT-2.0
12: CPT-0.5-MT C-PB-05-M
13: CPT-1.0-MT C-PB-10-M
14: CPT-2.0-MT C-PB-20-M
15: CPT-0.5-HT
16: CPT-1.0-HT
17: CPT-2.0-HT
18: CPS-0.5
19: CPSM-2.0
20: CTS-1.0
21: CTS-1.0-HT
22: CTS-2.0
23: C-LP-40-HM
24: C-LP-40-NM
25: CPB-0.5-HT
26: CPB-2.0-MT
27: CPB-0.5-MT
28: CPB-2.0
29: CPB-0.5
30: CPS-1.0 CPT-1.