GE AT600 - Inputs;Outputs Configuration

Chapter 3. Initial Setup and Programming
40 AT600 User’s Manual
3.6 Inputs/Outputs
3.6.1 Programming the Analog Output Menu
To access the Analog Output menu, on the initial screen, highlight the lock
symbol and press [√]. The following screen appears.
Select
Program and press [√]. The following screen appears.
To enter the password, use the [] or [] arrow key to select each digit to be
changed, use the [] or [] arrow keys to change the value of each digit, and
press
[]. The following screen appears.
In the User Preference menu, select Units Setting and press the right arrow key.
A screen similar to the following appears.
Select the desired Output number with the [] or [] arrow keys, and press
[] to enter the relevant configuration menu.
Velocity
m/s
0.0
Display
Display Format
Program
Program Review
Keypad Lockout
Enter the password
9999
]MOVE
]UNDO [ ]SAVE
]
]
]
]MODF
User Preference
Settings
Units Setting
Density
Password
Input/Output
Analog Output A
Digital Output B
Digital Output C
Modbus/Service Port