GE AT600 - User Preferences

AT600 User’s Manual 35
Chapter 3. Initial Setup and Programming
3.5 User Preferences
3.5.1 Setting
To check or change the desired settings, under User Preference, select Settings
and press
[]. The following screen appears.
To check the Meter Tag and/or Label, highlight your choice on the Setting
menu and press
[]. Press [] to return to the previous screen.
Note: You can only change the Meter Tag and Label data using Vitality
software.
To check or change the date/time, highlight System Date and press
[]. The
following screen appears.
Use the [] or [] arrow keys to select the correct time and press
[]. The
screen returns to the previous display.
User Preference
Units Setting
Density
Password
Setting
System Date
Setting
Meter Tag
Label
System Date
Setting
Meter Tag
Label
Set System Time
Date: 11 / 12 / 2013
Time: 08 : 09 : 10
]MOVE
]UNDO [ ]SAVE
]
]
]MODF
[