GE AT600 - Programming the Fluid Temperature

Chapter 3. Initial Setup and Programming
70 AT600 User’s Manual
3.7.6 Programming the Fluid Temperature
Select Fluid Type and press [√]. The following screen appears.
Press
[] again, and a screen similar to the following appears.
Use the [] or [] arrow key to select the digit to be changed, use the [] or
[] arrow keys to change the Fluid Temperature setting, and press
[] to return
to the previous screen. Then press [
] to return to the Sensor Setup screen.
Note: Since meter calculations are based on customer inputs, temperature will
affect the speed of sound during the measurement.
Sensor Setup
Traverses
Fluid Type
Fluid Temperature
Transducer Spacing
Fluid Temperature
Fluid Temperature
25.000 °C
Fluid Temperature
UNIT: °C
25.000
]MOVE
]UNDO [ ]SAVE
]
]
]MODF
[