GE AT600 - Resetting the Totalizer

Chapter 3. Initial Setup and Programming
30 AT600 User’s Manual
3.3.5 Resetting the Totalizer
To reset the totalizer, proceed as follows:
From the display screen, press either the [] or [] buttons until the
Reset icon
(a partial circle with an arrow) is highlighted.
Once the
Reset icon has been highlighted, press [] to reset the totalizer to 0.
TOTAL m^3
Forward 0.000e+00
Reverse 0.000e+00
TOTAL m^3
Forward 0.000e+00
Reverse 0.000e+00