GE AT600 - Page 67

AT600 User’s Manual 55
Chapter 3. Initial Setup and Programming
Setting the HART Address
To set the address, in the
Modbus menu, select Address and press []. A screen
similar to the following appears.
Press
[] again, and a screen similar to the following appears.
Use the [] or [] arrow keys to change the address number (from 0 to 62) and
press
[]. Press [] to return to the previous screen.
HART
Address
Address
Address
0
Address
0
]MOVE
]UNDO [ ]SAVE
]
]
]MODF
[