Chapter A3: Worklist
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A3-15
Operator Manual © 2008 General Electric Company. All rights reserved.
Add / Edit Patient Information
Overview
The Add Patient (Figure A3-9) and Patient Information screens allow you to enter patient and procedure
information before starting an exam or to view the information at any time.
NOTE: This screen may also be known as the Medical Procedure Card or MPC.
• To add a patient to the Worklist, press [ADD PATIENT] and enter or select the appropriate information.
NOTE: Make sure the patient’s name, ID number, birth date, and gender information are entered correctly.
CAUTION: Use only standard alphanumeric characters to complete the screen.
• To view the patient information from the Worklist or Image Management screens, select the exam
then press [PATIENT INFORMATION]. Patient information is not editable when launched from the
Image Management screen.
• To view the patient information from the Acquisition or Image Viewer screens, press [PATIENT
INFORMATION]. Patient information is not editable when launched from these screens.
Patient Information provided by the HIS/RIS is not editable.
Patient Information entered locally is editable until the exam is started. It is not editable after the exam is
started or in progress.
NOTE: The Patient Information button is unavailable when multiple exams are selected at the same time.
Figure A3-9 Add Patient or Patient Information
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
