Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-49
Operator Manual © 2008 General Electric Company. All rights reserved.
24. Press [CLOSE].
A message appears: “Changes have been made to the Protocol Database. Would you like to save
these changes?”
25. Press [YES].
The Exam Menu screen closes and returns you to the Preferences - Protocols screen.
Protocol Editor Copy Functions
Follow this process to access the Protocol Database Editor.
1. From the Worklist, select [UTILITIES].
2. Select Preferences > Protocols.
3. Press [EDIT].
The Exam Menu appears.
Figure A7-32 Exam Menu
4. Continue with Copy Category
(p. A7-49), Copy Exam (p. A7-50), or Copy View (p. A7-50).
Copy Category
1. Select the Category to copy
2. Press [COPY CAT].
3. Enter the new name to use or retype the existing name
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
