GE Definium AMX 700 - Specifications; Detector Size and Weight; Environmental Constraints

Chapter A1: Detector Overview
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A1-11
Operator Manual © 2008 General Electric Company. All rights reserved.
Specifications
Detector Size and Weight
Table A1-2 Detector size and weight specifications
Environmental Constraints
Table A1-3 describes the environmental conditions that the detector is designed to withstand.
CAUTION: Operation or storage outside of these constraints may cause damage to the detector.
Table A1-3 Environmental Constraints
Item Specification
Overall detector size
• Including handle
• Not including tether
Thickness: 27mm
Width:465mm
Height:585mm
Image Size
The active area of the x-ray panel
2022 x 2022 pixels or
40.4 x 40.4 cm
Weight
Not including the tether or grid
6 kg
Tether
The detector interfaces with the external controller via
one tether cable that contains 2 connections,
communication interface (with external controller), and
power interface (with detector power supply)
The tether is at least 4.5 meters in length.
Item Operating Environment Constraints
Non Operating Environment
Constraints
This column contains additional
operating environmental constraints,
within which the subsystem function
and performance capabilities shall be
in compliance.
This column defines additional Non-
operating environmental constraints,
within which the subsystem function
and performance capabilities shall be
in compliance, when returned to the
operational state, within operating
environment conditions.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).