Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-12
Operator Manual © 2008 General Electric Company. All rights reserved.
Remove DICOM Printer
Follow this process to remove a printer.
1. From the Network Connections screen, select the printer.
2. Press [REMOVE].
A message appears: “Are you sure you want to remove (printer name)?”
3. Press [YES].
[CANCEL] closes the message and returns you to the Network Connections screen without
removing the connection.
The printer is removed.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
