Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-16
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure A7-12 Preset Names screen
Add Preset Names
1. Press [ADD] for the appropriate group.
2. Type the name to add.
3. Press [ADD].
Edit Preset Names
1. Select the name to change.
2. Press [EDIT] for the group.
3. Edit the name as appropriate.
4. Press [SAVE].
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
