Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-27
Operator Manual © 2008 General Electric Company. All rights reserved.
4. Press [SAVE].
Remove Pre-set Annotation
1. From the Pre-set Annotations screen, select the annotation.
2. Press [REMOVE].
A message appears: “Are you sure you would like to delete the annotation – (annotation name)?”
3. Press [OK].
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
