Chapter A6: Image Management
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A6-8
Operator Manual © 2008 General Electric Company. All rights reserved.
Synchronize to HIS or RIS or PACS
Upon connection to the network, the system will:
• automatically connect to PACS and auto send images (if auto send is enabled)
• automatically connect to printers and print images queued for auto print (if auto print is enabled)
Refer Chapter A7: Set Preferences-Network Connections
(p. A7-2) for more information about configuring
network and printer connections.
To update the Worklist with HIS or RIS data, press the [REFRESH] button. Refer to Chapter A3: Worklist-
Refresh (p. A3-11) for more information.
Search List
The Search feature finds procedures by column.
Figure A6-3 Search by column drop-down list
1. Press the button on the Search By drop-down list to select the column you want to search.
If the column you want is already selected, begin at step 3.
2. Select the column. For example, Patient ID.
The list automatically sorts the selected column.
3. Type the search criteria into the text box. For example, you are looking for patients whose names
begin with “J”, so you would type “j” into the text box.
NOTE: The text box is not case sensitive.
4. Continue typing the search criteria.
The list automatically selects the first procedure that matches what you have typed into the text
box.
If no procedures match what you have typed, the list de-selects all procedures and places the
closest match at the top of the exam list.
Sort by Column
Sorting allows you to organize the procedures by the column of your choice.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
