Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-42
Operator Manual © 2008 General Electric Company. All rights reserved.
Follow this process to access the Protocol Database Editor.
1. From the Worklist, select [UTILITIES].
2. Select Preferences > Protocols.
3. Press [EDIT].
The Exam Menu appears.
4. Continue with Add or Edit Category
(p. A7-42), Add or Edit Exam (p. A7-43) or Add or Edit View (p. A7-
44)
Figure A7-30 Exam Menu
Add or Edit Category
NOTE: The screens and process to edit a category are the same as for adding a category.
From the Exam Menu:
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
