Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-44
Operator Manual © 2008 General Electric Company. All rights reserved.
3. Type an Exam Name. (Use underscores instead of spaces.)
4. From the Position Exam After drop-down list, select the position of the exam within the category.
5. Select the Default Patient Size for the exam.
6. Press [OK].
7. Continue with Add or Edit View
(p. A7-44).
NOTE: Exams must be populated with new or copied views after creation in order to be fully functional
Add or Edit View
NOTE: The screens and process to edit a view are the same as for adding a view.
This process has multiple screens.
From the Exam Menu:
1. Expand the Category.
2. Select the Exam to add or copy the new view to.
3. Press [ADD VIEW] or [EDIT VIEW].
The Add View (or Edit View) screen (1 of 2) appears.
4. Type a View Name. Do not use spaces. Use underscores ( _ ) to separate words.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
