Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-2
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure A7-1 System Utilities screen
System
This section provides instructions for setting your system preferences for network and printer
connections. The Services Desktop, Log Off, and Shut Down functions are also available from this screen.
Refer to Chapter A2: General Information
for more information about logging off and Shut Down.
Network Connections
Network and printer connections are configured through the Utilities System-System screen. This screen
allows qualified service personnel to define the Digital Imaging and COmmunication in Medicine (DICOM)
send destinations.
Network connections may be added, removed, or edited from this screen.
Follow this process to access the Network Connections screen.
1. On the Worklist screen, press [UTILITIES].
The System-System screen appears.
2. Press [NETWORK CONNECTIONS].
The Network Connections screen (Figure A7-2) appears.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
