Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-8
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure A7-5 Network Connections screen
Add or Edit DICOM Printers
Adding and editing printers use very similar process and the same screens shown in Figure A7-6,
Figure A7-7, and Figure A7-8. Table A7-3, Table A7-4, and Table A7-5 describe the fields in detail.
1. If Editing an existing printer’s configuration, select the printer from the DICOM Printers list and press
[EDIT].
If adding a new printer, press [ADD].
2. Complete requested information for all tabs (see Table A7-3, Table A7-4, and Table A7-5) and press
[SAVE] to add the printer or save the changes.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
