Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-9
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure A7-6 Add Printer screen – Printer Tab
Table A7-3 Add Printer screen– Printer Tab description
Function Description
DICOM Printer Label The name of the printer that appears in the DICOM Printers list and on the
print setup screens.
NOTE: DICOM printer labels cannot have spaces in the name. Use underscores
( _ ) to separate words.
Application Entry
Title
The DICOM application title.
Network Address The IP address of the printer.
Port Number The port number of the printer.
Pixel Depth The resolution of the printer.
Printer Pixel Size
(micron)
Designates the pixel size the printer uses. This is specified by the printer
manufacturer.
Configuration
Information
A place for you to add notes about the printer or configuration.
Density Sets the minimum and maximum density range.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
