Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-10
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure A7-7 Add Printer screen – Layouts tab
Magnification Type Available options are:
•Replicate
•Bilinear
•Cubic
•None
Smooth Factor Sets the image smoothing factor.
Trim Designates if there is to be trim or not.
Polarity Available options are:
•Normal
•Reverse
Border Density Sets the color of the image border.
Available options are:
•Black
•White
Empty Image
Density
Sets the color of areas that have no image printed.
Available options are:
•Black
•White
Printer Memory Size Designates the memory size of the printer. This is specified by the printer
manufacturer.
Function Description
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
