EasyManua.ls Logo

GE Definium AMX 700 - Page 74

GE Definium AMX 700
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter A1: Detector Overview
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A1-12
Operator Manual © 2008 General Electric Company. All rights reserved.
Ambient
•Temperature
Humidity
Pressure
External ambient temperature
range: +10 ºC to +30 ºC.
Rate of temperature change:
10 ºC per hour
Ambient humidity range: 10% to
80%, non condensing.
Rate of humidity change: 30% per
hour.
Atmospheric pressure (altitude)
range: -400 meters to +3000 meters
relative to sea level.
External ambient temperature
range: 0ºC to +50 ºC.
Rate of temperature change:
20 ºC per hour
Ambient humidity range: 5% to 95%,
non condensing.
Rate of humidity change: 30% per
hour.
Atmospheric pressure (altitude)
range: -100 meters to +15,000
meters relative to sea level (to
support pressurized transport)
Mechanical
Stress &
Vibration
Forces
The detector assembly shall not be
exposed to operating vibration
spectrum exceeding the following
parameters:
•Type: Random
Frequency Range: 20 to 350 Hz
Magnitude: 0.006g2 /Hz at 10-350
Hz
Duration: 8 hours/axis (x, y, z)
The detector assembly shall not be
exposed to non-operating vibration
spectrum exceeding the following
parameters:
•Type: Random
Frequency Range: 10 to 2000 Hz
Magnitude: 6 m/s2 RMS or
0.02g2 /Hz at 10-2000 Hz
Duration: 15 minutes/axis (x, y, z)
Shipping &
Storage
Environment
Not applicable. The non-operating shipping conditions
shall be -20 to +60 with the detector
and packing.
The shipping container shall protect
the detector from vibration of 2 Grms
for 8 hours in the x, y, and z axes,
random vibration from 10 to 2000 Hz
such that the image quality is not
degraded.
Cargo hold during shipment shall be
within the atmospheric pressure range
of 700-1100hPa
Item Operating Environment Constraints
Non Operating Environment
Constraints
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).

Table of Contents

Related product manuals