Chapter A5: Image Viewer
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A5-8
Operator Manual © 2008 General Electric Company. All rights reserved.
Windowing Applies windowing to the selected image.
Available options are:
• Normal - image as acquired
• Hard - adjusts the image towards black and white
• Soft - adjusts the image towards gray
The GE Portable DR Detectoruses a “Smart Windowing”
algorithm to optimize image quality. Smart Windowing is an
automated, image-based, and technique-independent
method of selecting brightness and contrast for image display.
Earlier methods mostly relied on technique information (kVp,
dose level, etc.) to set brightness/contrast, making them more
prone to operator and system errors.
Vertical Flip Flips the selected image 180 degrees on the horizontal axis;
that is, switches top for bottom.
Horizontal Flip Flips the selected image 180 degrees on the vertical axis; that
is, switches left for right.
Rotate Left Rotates the selected image counter-clockwise in 90 degree
increments.
Rotate Right Rotates the selected image clockwise in 90 degree increments.
Free Rotation Rotates the selected image both clockwise and counter-
clockwise. The range is -180° to 180°.
• Press the end buttons to rotate the image in 0.1 degree
increments.
• Press and drag the slider to spin the image.
• Move the slider right to rotate the image clockwise.
• Move the slider left to rotate the image counter-clockwise.
Restore Image Removes all adjustments and returns the selected image to its
original state.
Tool Description
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
