Chapter A5: Image Viewer
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A5-26
Operator Manual © 2008 General Electric Company. All rights reserved.
Format Selects the print format.
Available options are:
•Standard
•35 mm
•40 mm
Media Size Shows the available sizes that are configured for the selected printer.
# of Copies Defines how many copies to print.
Media Type Selects the type of media to print on.
Available options are:
•Paper
•Clear film
• Blue film
Destination Selects the destination.
Available options are:
• Processor
• Magazine
Magnification
Type
Selects the magnification type.
Available options are:
•Cubic
•None
Annotation Selects the amount of annotation to print on the image.
Available options are:
•Full
•Partial
•Custom
•None
Refer to Annotate and Mask Images
(p. A5-9) for more information.
[EDIT] If Custom Annotation was selected, brings up a screen that allows you to choose
the annotation to print on the image.
Refer to Annotate and Mask Images
(p. A5-9) for more information.
[PREVIEW] Shows how the image will appear on the film or paper with the current settings.
[PRINT] Prints the image.
[CANCEL] Cancels printing.
Field Description
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
