Chapter A6: Image Management
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A6-2
Operator Manual © 2008 General Electric Company. All rights reserved.
Selecting multiple exams on the Image Management screen is different than on the Worklist. The Image
Management screen allows you to select exams that do not have the same Patient ID or Patient Name.
To select multiple exams, press the [SELECT MULTIPLE] button, then select the exams. The [SELECT
MULTIPLE] button will remain engaged until an action (such as Copy Exam or Transfer) is completed, then
the button will automatically disengage.
Figure A6-1 Image Management screen
Table A6-1 Image Management screen functions
1. Selected
exam
2. Series in
exam
3. Image
detail
button
4. Images in
selected
series
5. Preview of
selected
image
Function Description
navigation bar Allows you to change between the Worklist, Image Management,
and Utilities screens or allows you to logoff the system (if applicable).
The darker color indicates which screen is currently displayed. The
individual buttons are described below.
[WORKLIST] Opens the Worklist screen where patient procedures may be added
to the schedule and exams started.
Refer to Chapter A3: Worklist
for more information.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
