EasyManua.ls Logo

GE Definium AMX 700 - Page 150

GE Definium AMX 700
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter A6: Image Management
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A6-5
Operator Manual © 2008 General Electric Company. All rights reserved.
Exam, series, and images list Lists the images saved in the local database categorized by exams
and series. The following information is displayed:
Exams - the exams saved in the local database
Series detail - the series for the selected exam
Image list - the images for the selected series
Image preview - a representative thumbnail of the selected image.
Figure A6-1 shows how the information is organized.
Destination Selects where images are to be copied or saved. The first button
switches between the local unit and any configured network hosts.
NOTE: If the GE Portable DR Detector is used in a mobile unit, network
hosts will only be available when the unit is connected to the
network.
NOTE: For mobile units, the [CD1] button is only available if the unit’s
external CD drive is connected.
Refer to Copy Exams and Images
(p. A6-9) for more information.
[DELETE] Deletes the selected exams, series, or images from the local
database.
Refer to Delete Exams, Series, or Images
(p. A6-13) for more
information.
[VIEWER] Opens the Image Viewer screen and shows the images in the
selected series. Images may be adjusted on the Image Viewer screen.
Refer to Chapter A5: Image Viewer
for more information.
network connection status Appears when the Definium AMX 700is connected to the hospital
network.
wireless network connection
status
If the wireless network connection is enabled, displays the status of
the connection and signal strength. Refer to Chapter A2: General
Information-Wireless Network Connection (p. A2-7) for more
information.
[TRANSFER LOG] Shows a list of transferred exams and their destinations.
Refer to Copy Exams and Images
(p. A6-9) for more information.
Function Description
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).

Table of Contents

Related product manuals