Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-5
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure A7-4 Add Network Host – Preferences tab
Table A7-2 Add Network Host – Preferences tab description
Storage Commitment -
Network Address
The IP address of the storage database.
Storage Commitment -
Port Number
The port number of the storage database.
Comments Allows you to add notes about the network host or configuration.
Function Description
Allow this host to query the (GE
Portable DR Detector system name)
Allows this host to search and filter the GE Portable DR
Detectorsystem.
Allow this host to retrieve from the
(GE Portable DR Detector system
name)
Allows this host to open and display exams from the GE
Portable DR Detectorsystem.
Allow this host to send images to the
(GE Portable DR Detector system
name)
Allows the host to send images to the GE Portable DR
Detectorsystem.
This network host accepts multiple
frame image.
Allows multiple frame images to be send to this network
host.
Perform de-identification
(anonymous patient images) when
sending to this network host.
Automatically de-identifies any images that the GE Portable
DR Detector system sends to this host.
Refer to Chapter A6: Image Management-Make Exam
Anonymous (De-Identify) (p. A6-14) for more information
about de-identification.
Function Description
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
