GE Definium AMX 700 - Page 174

Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-14
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure A7-10 Worklist Default Query screen
Table A7-6 Worklist Default Query description
Function Description
Show list for Determines Worklist items by system or modality.
• This system – exams for this unit only
• All systems in modality – exams for all digital x-ray
• All systems – exams for all modalities
Include Allows you to include or exclude completed or discontinued exams on the
Worklist.
Date Range Selects the date range of scheduled procedures to show on the Worklist.
Available options are:
•All
•Current Day
Plus previous
__ Days __ Hours
Shows procedures that are scheduled for the specified time before the
selected date range.
NOTE: If the “Days” value is left blank, the worklist query will be based on
current time plus the number of hours entered.
Plus future
__ Days __ Hours
Shows procedures that are scheduled for the specified time after the
selected date range.
NOTE: If the “Days” value is left blank, the worklist query will be based on
current time minus the number of hours entered.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).