Chapter 3: Hardware Overview
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) 3-2
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure 3-1 Definium AMX 700 back and front
Table 3-1 Definium AMX 700 features
Back Front
Item Description
1 Tube head. Refer to Chapter 4: Moving and Positioning-Position the Tube
(p. 4-5) for more
information.
2 Collimator controls. Refer to Chapter 4: Moving and Positioning-Adjust the Collimator
(p. 4-7)
for more information.
3 Collimator skin spacing bars.
4 Tube latch mechanism. Locks the tube head down during transport. Refer to Chapter 4:
Moving and Positioning-Latch Lock Release (p. 4-5) for more information.
5 Wireless antenna. Connects the unit to the facility network for the transfer of images and HIS
or RIS data. Refer to Chapter A2: General Information-Wireless Network Connection
(p. A2-7)
for more information about using the wireless connection.
6 Telescopic arm. The arm extends for tube placement. Refer to Chapter 4: Moving and
Positioning-Adjust Column and Telescoping Arm (p. 4-6) for more information.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
