Chapter A1: Detector Overview
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A1-1
Operator Manual © 2008 General Electric Company. All rights reserved.
Chapter A1: Detector Overview
This section outlines the basic detector functions, usage, care, and specifications.
Topics covered include:
• Detector Functions
(p. A1-2)
• Description
(p. A1-2)
– Panel
(p. A1-3)
– Electronics
(p. A1-3)
– Physical Appearance / Finish
(p. A1-3)
– Nameplates and Markings
(p. A1-3)
– Detector Safety Labels
(p. A1-4)
• Use
(p. A1-5)
– Detector Alignment
(p. A1-5)
– Indicator LEDs
(p. A1-5)
– Electro-magnetic Interference
(p. A1-6)
• Detector Grid
(p. A1-7)
– Grid Attachment
(p. A1-7)
• Handling and Cleaning
(p. A1-8)
– Detector Handling
(p. A1-8)
– Tether Handling
(p. A1-9)
– Grid Handling
(p. A1-9)
– Cleaning
(p. A1-10)
• Specifications
(p. A1-11)
– Detector Size and Weight
(p. A1-11)
– Environmental Constraints
(p. A1-11)
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
