Section 6 — Take Recordings
124
Save Recordings
There are several options for saving your recordings when you open the
Record Review menu. The table outlines these.
Auto Save,
BL,
Bands
Your instrument momentarily displays the recorded
information on the screen before returning you to the
Record Review menu.
Auto +
Delay,
BL, Bands
Your instrument displays the recorded information on the
screen for several seconds before returning you to the
Record Review menu.
BL
Your instrument displays a data quality message if the
difference between the last measurement taken and the
preconfigured baseline value is outside the typical or
expected range of variance. This applies if a baseline has
been configured and if the measurement differs from the
baseline by more than 50%.
Bands
Your instrument displays band alarms if these have
previously been configured in Ascent.
To Next Page
Loading...
