Section 10 — Create, Edit, and Delete Items
200
Create Parameter Set
A parameter set describes the settings used to take a measurement. A
parameter set includes information such as the type of measurement,
Fmax, units of measurement, number of averages, and more. To create
a parameter set:
1. Press or Record Review on the main menu.
2. Use the arrow keys on the left to select a machine.
TIP: If there are no machines displayed, press to make these
visible.
3. Press repeatedly to expand the machine until the required axis
location is selected.
4. Press to display the machine creation icons > Press Add
New Schedule.
5. Select a measurement type — The screen will display the default
parameters for your measurement.
6. Press to assign the default parameter set to this location (if
required).
7. Press to create a new parameter set — It will display at the top
of the list, ready for editing.
8. Press Edit Name to rename the parameter set > Enter a name
for the parameter set > Press .
9. Edit the other parameters as required.
10. Press to assign a different sensor (see below) or press to
return to the Record Review menu.
To Next Page
Loading...
