Section 6 — Take Recordings
126
Review Stored Recording
To review recordings you have taken and stored:
1. Press or Record Review on the main menu.
2. Use the arrow keys on the left to scroll up and down > Select the
recording you wish to review.
3. Press to display the button labels.
4. Press Expand Navigator repeatedly to expand a machine so
its locations and parameter sets display.
5. Press Review Selected Recording to display the newest
recording.
NOTE: When you highlight a parameter set, its associated
recordings display in the Review column. The newest recording is
highlighted at the top of the column.
6. Display older recordings:
a. Press to select the Review column — A black border
displays around the column to indicate you can now move
up/down through the recordings.
b. Use the arrow keys on the left to select a recording > Press
to display your selection.
NOTE: An asterisk beside a recording indicates that more than one
recording type is contained within the record (spectrum and
waveform, or 6Pack combination measurements, for example).
7. Use the cursors, harmonics, and zooming to analyze the data better.
MORE: See Analyze Measurement for more information on using
cursors and zooming.
8. Press View Schedule (if required).
9. Press to return to the Review column when you have finished
reviewing the recording.
10. Select another recording for review or press and hold to return
to the main menu.
To Next Page
Loading...
