Section 10 — Create, Edit, and Delete Items
213
Delete all Stored Information
All folders, machines, parameter sets, recordings, and notes are stored in
a single database. You can empty the database on your instrument to
clear out all your machine structures, customized settings, and
recordings. Doing this will restore your instrument to its default factory
settings.
You should only empty the database on your instrument if it becomes
corrupt, or if you are certain you no longer require any of the information
stored on your instrument (e.g. if you plan to resell the instrument).
Before emptying the database, transfer any information you wish to
save into Ascent.
WARNING! Emptying the database on your instrument removes
all information you have stored there. You will lose all machines,
routes, parameter sets, and notes you have stored on your
machine. Only the factory default settings will remain (e.g. axis
names, parameter sets, and notes).
To delete the information stored on your instrument:
1. Press Folders & USB Export on the main menu.
2. Press Empty Database.
3. Press twice to confirm.
To Next Page
Loading...
